Cabletron Systems MT8-MIM Especificaciones descargar pdf (Pagina 40)

Chapter 4: Desktop Network Interface (DNI) Problems

4-4 Troubleshooting Guide

4.6 Client Driver Loads, but Cannot Find Any Novell Servers

Check the Link, Transmit, and Receive LEDs on the DNI card.

Is the Link LED lit and are the Transmit and Receive LEDs blinking?

Ensure that the correct media is selected, verify that the cable is okay, or try a different port on the hub.

Did this solve the problem?

Call Cabletron Technical Support.

Congratulations, the problem is solved.

Is the card an E22xx?

Try a different shared memory region.

Is the shared memory region excluded on the EMM386 command line in config.sys?

Exclude the shared memory.

Did this solve the problem?

Call Cabletron Technical Support.

Congratulations, the problem is solved.

Check the Startup.ncf file on the Novell Server.

Is the “Set Maximum Physical Receive Packet Size” set to at least 1518?

Set the maximum packet size to 1518.

The frame type (Ethernet-802.2, -802.3, -II, or SNAP) being used on the client and server Personal Computers (PCs) may

not be the same.

Are the frame types different?

Call Cabletron Technical Support.

Set the client and server PCs to use the same type frame and try to connect with the Novell Server.

Can the users connect with the Novell Server?

Call Cabletron Technical Support.

Congratulations, the problem is solved.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 113 114

Sin comentarios

Cabletron Systems MT8-MIM Especificaciones Pagina 40