Cabletron Systems MT8-MIM Especificaciones descargar pdf (Pagina 29)

Troubleshooting Guide 3-11

3.2.2 BootP Downloading Using a PC with Remote LANVIEW 2.10

To use Remote LANVIEW 2.10 for BootP, proceed as follows:

1. Make sure that you follow the ARP cache or Frequent Destination instructions provided in Section 3.1.1,

step 3, before configuring Remote Lanview 2.10.

2. Click the pulldown menu under Control, then TFTP Download. This brings up the icon shown in

Figure 3-9.

Figure 3-9. BootP Icon

3. Double click on the BootP icon, then pull down the configure menu and select Configure BootP Server. The

Configure BootP Server screen is displayed (Figure 3-10).

Figure 3-10. Configure BootP Server Screen

4. Add the MAC address to the MAC Address field while making sure you use hyphens.

5. Enter the IP address to the IP Address field using Dotted Decimal Notation (DDN).

6. Enter the filename by using the B

rowse button. The file name and path should not exceed more than 25

characters. The example, c:\emme.hex uses 11 characters. Keep the file path as close to the root as possible

to minimize the length.

7. Click on U

pdate so the data configured is now in the large box on the screen.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 113 114

Sin comentarios

Cabletron Systems MT8-MIM Especificaciones Pagina 29