Cabletron Systems MT8-MIM Especificaciones descargar pdf (Pagina 28)

Chapter 3: Booting/Image Code Loading Problems

3-10 Troubleshooting Guide

3. Click on the BootP Server tab. The BootP Server screen (Figure 3-8) is displayed.

Figure 3-8. BootP Server Screen

4. Enter the correct MAC address in the MAC Address field while making sure to use hyphens.

5. Enter the IP address in the I

P Address field using periods (Dot Decimal Notation).

6. Enter the filename by using the B

rowse button. The filename and path should not exceed more than 25

characters. For example, c:\emme.hex uses 11 characters. Keep the file path as close to the root as possible.

7. Click on U

pdate so the data configured is now in the large box in the BootP Server screen.

8. If the ARP table and this BootP screen are configured correctly, you should be able to click the TFTP

Server tab and see the download start. If the download does not start, verify the following:

• The MAC addrs used is correct.

• The data path and ﬁlename are correct. The ﬁlename should have a .hex extension.

Correct as necessary. Then try this BootP Download procedure again.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 113 114

Sin comentarios

Cabletron Systems MT8-MIM Especificaciones Pagina 28