Cabletron Systems MT8-MIM Especificaciones descargar pdf (Pagina 27)

Troubleshooting Guide 3-9

Therefore, if you are using a multiple interface device like the EMME or EMM-E6, make sure you use the

correct MAC address. An EMME has four MAC addresses. The white label on the front of the EMME shows

the MAC address for the ﬁrst channel (A). You need to increment the address to the channel that your Network

Manager Station comes in on. If, for example, the data path for the Network Management Station goes through

a TPRMIM set to channel C, then increment the MAC address from CB to CD (for example, from

00:00:10:13:12:CB to 00:00:10:13:12:CD).

Other devices such as the MRXI, IRM-3, TRMM, TRXI, SEHI, MiniMMAC, and MicroMMAC only have one

MAC address assigned, which appears on the white label.

Section 3.2.1 through Section 3.2.3 provide guidelines on how to BootP download to a device using a PC

running SPECTRUM Element Manager, Remote LANVIEW 2.1x and Remote LANVIEW 2.0x applications.

3.2.1 BootP Downloading Using a PC with SPEL

To use SPEL for BootP, proceed as follows:

1. Make sure that you follow the ARP cache or Frequent Destinations instructions described in Section 3.1.1,

step 3, before configuring SPECTRUM Element Manager.

2. Bring up the TFTP/BootP application by either going to the Program group and double clicking on the

TFTP-BootP Services icon, or click once on the icon in the Device list or the map and select the Utilities

TFTP/BootP pulldown menu. The Start Download screen is displayed (Figure 3-7).

Figure 3-7. Start Download Screen

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 113 114

Sin comentarios

Cabletron Systems MT8-MIM Especificaciones Pagina 27