Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 94)

100

101

84 Installation Guide for Clients

4. In the Network Protocols dialog box, add or remove protocols from

this network device driver configuration. A protocol is included in

this network device driver configuration when the check box at the

left of the protocol is selected.

A protocol is selected ([X]) or cleared ([ ]) by clicking the check box,

or by pressing the UP or DOWN ARROW key until the protocol is

highlighted, and then pressing the SPACEBAR.

5. When you finish adding or removing protocols, choose the OK

button.

The selected protocols are bound to the network adapter driver in this

network device driver configuration. The Workstation Configuration

dialog box returns, showing the modified network device driver

configuration.

6. Optionally, from the Workstation Configuration dialog box you can:

• Return to step 2 and change the protocol(s) bound to a network

adapter driver in another network device driver configuration.

• Add another network device driver configuration (as described

later in this section).

• Remove a network device driver configuration (as described later

in this section).

7. When you have completed your review or changes, exit the

Workstation Configuration dialog box.

• To exit this dialog box and discard any changes you made, choose

the Cancel button. The Setup screen returns. You are finished, and

steps 8 and 9 do not apply.

• To save any changes you made, choose the OK button. Depending

on this computer’s configuration and whether you made changes,

the TCP/IP Settings dialog box (step 8), the Configuration

Complete dialog box (step 9), or the Setup screen appears.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 418 419

Comentarios a estos manuales

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 94

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cabletron Systems T2015