Cabletron Systems T2015 Guía de instalación Pagina 361

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 419
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 360
Appendix D Microsoft Data Link Control Protocol 351
Installing the Microsoft DLC Protocol
Use the LAN Manager Setup program to install the Microsoft DLC
protocol driver.
To install the Microsoft DLC protocol driver
1. Start the LAN Manager Setup program.
2. From the Configuration menu select Network Drivers. The
Workstation Configuration dialog box appears.
3. Select the network adapter driver to which you want to bind the
Microsoft DLC protocol. Choose the Add/Remove Protocols button.
The Network Protocols for adapter dialog box appears. Select the
Microsoft DLC driver from the list and choose the OK button.
If Microsoft DLC is not in the list of protocols, choose the Other
Protocol button. Then insert the disk containing MS-DOS drivers,
which has the Microsoft DLC protocol driver, in the drive specified.
Or, if the protocol driver is elsewhere on the network, type the
pathname to the driver. Choose the OK button.
A list of drivers on the disk will appear. Select the Microsoft DLC
driver and choose the OK button. LAN Manager will copy all
necessary files and modify your initialization files.
4. Exit the LAN Manager Setup program.
5. If your network adapter requires reserved memory, use the memory
manager to exclude the necessary memory blocks from the operating
system. For more information on excluding memory blocks, refer to
“Planning for Installation or Configuration” in Chapter 2, or to the
documentation that accompanies your memory manager.
6. In order to use shared folders on an AS/400, you need to use two
device drivers from IBM’s PC Support program. To do so, include
these lines in your CONFIG.SYS file:
7. If you are using an AS/400, and you cannot connect, you may need to
set the lan connections retry value in the Control Description on the
AS/400 to 60.
8. Reboot your computer.
Vista de pagina 360
1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 418 419

Comentarios a estos manuales

Sin comentarios