Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 197)

100

101

Chapter 9 Network Device Driver Options 187

HP Ethertwist

Required entry:

• drivername = hplanb$ or hplanbn$

This driver is for the following network adapters:

• HP Ethertwist 8 TL (PC27250A)

• HP Ethertwist 8 TP (HP27245)

• HP Ethertwist 16 TP (HP27247B)

Note

Do not use the HP Ethertwist 8 TP (HP27245) network adapters

with 386/25 or faster computers.

The following table summarizes the possible entries and values in the

[hplanb] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — hplanb$ or hplanbn$

interrupt integer 2, 3, 4, 5,

ioaddress hex. 200–340 300

maxhwtrans integer 2–20 8

maxmulticast integer 1–200 5

maxswtrans integer 1–20 2

Entries in the [hplanb] section of the LAN Manager PROTOCOL.INI

file have the following meanings:

drivername

Identifies the driver name of the network device driver. The base

portion of the filename, plus a digit when more than one adapter is

installed, is the drivername. The drivername is hplanb$ for the first

adapter, hplanb2$ for the second, and so on.

interrupt

Indicates the interrupt level of the network adapter. The interrupt

parameter should match the adapter’s interrupt jumper settings. The

default setting is 3.

ioaddress

Indicates the base I/O address for the network adapter. If this entry

does not match the adapter’s I/O address jumper settings, the driver

reports an error. The valid values are 200, 240, 280, 2C0, 300, 320,

and 340.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 418 419

Comentarios a estos manuales

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 197

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cabletron Systems T2015