Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 118)

108 Installation Guide for Clients

NetBIOS 3.0 and the CONFIG.SYS File

The NETBIOS.OS2 driver must be loaded after the LAN Manager

redirector driver (NETWKSTA.SYS) is loaded. Make sure the

following line is entered after the LANMAN 2.2 === DO NOT

MODIFY BETWEEN THESE LINES section:

NetBIOS 3.0 and the LANMAN.INI File

In the [networks] section of LANMAN.INI, there is a netn line that

accepts parameters for installing NetBIOS. These parameters are

separated by commas, and are listed in the following order:

Devicename

For the NetBIOS 3.0 interface, use the devicename netbeui$. The

interface currently functions only with NetBEUI.

LANA number

Specifies the number of the local-area network adapter (LANA) that

NetBIOS 3.0 accesses. A value of 0 will access the first LANA bound

to NetBEUI. Examine the bindings line in the [netbeui] section of the

PROTOCOL.INI file to find out the order in which the LANAs are

bound.

Type

Specifies the type of NetBIOS driver. For the NetBIOS 3.0 interface,

use type LM10.

Number of NCBs

Specifies the number of NetBIOS network control blocks (NCBs)

that LAN Manager will hold back from the NetBIOS driver at

initialization. LAN Manager obtains these NCBs from the NetBEUI

protocol driver, so this value should be less than your current setting

for NetBEUI. NetBEUI defaults to 85 NCBs, unless you specify

another value in PROTOCOL.INI.

Number of sessions

Specifies the number of session resources that LAN Manager will

hold back from the NetBIOS driver at initialization. LAN Manager

obtains these sessions from the NetBEUI protocol driver, so this

value should be less than your current setting for NetBEUI. NetBEUI

defaults to 40 sessions, unless you specify another value in

PROTOCOL.INI.

Number of names

Specifies the number of name resources that LAN Manager will hold

back from the NetBIOS driver at initialization. LAN Manager obtains

these name resources from the NetBEUI protocol driver, so this value

should be less than your current setting for NetBEUI. NetBEUI

defaults to 17 names, unless you specify another value in

PROTOCOL.INI.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 418 419

Comentarios a estos manuales

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 118

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cabletron Systems T2015