Cabletron Systems T2015 Guía de instalación Pagina 162

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 419
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 161
152 Installation Guide for Clients
3Com EtherLink Plus
Required entry:
drivername = elnkpl$ or elnkpln$
The following table summarizes the possible entries and values in the
[elnkpl] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
datatransfer DMA
dmachannel integer 1, 3, or 5–7 1
drivername elnkpl$ or
elnkpln$
interrupt integer 3–15 3
ioaddress hex. 300–3F0 300
maxtransmits integer 8–50 23
netaddress hex. 12 hex. digits
Entries in the [elnkpl] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
datatransfer
Specifies the data transfer mode for the network adapter, according to
DMA, PIO_WORD, or PIO_BYTE values.
dmachannel
Indicates the current DMA jumper configuration of the network
adapter. The value can be 1, 3, or 5–7.
drivername
Identifies the device driver name. The drivername is elnkpl$ for the
first adapter, elnkpl2$ for the second, and so on.
interrupt
Indicates the interrupt level of the network adapter.
ioaddress
Identifies the I/O base address.
maxtransmits
Specifies the number of transmit queue entries in this driver. For an
OS/2 server, multiply the transmit window size by the maximum
number of sessions.
Vista de pagina 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 418 419

Comentarios a estos manuales

Sin comentarios