Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 252)

242 Installation Guide for Clients

maxrequests

Specifies the maximum number of outstanding general requests and

configures the size of general request queue.

maxtransmits

Specifies the maximum number of outstanding transmit chain

commands. This configures the size of the transmit chain request

queue.

nodeaddress

If specified, this entry will be used in place of the universal burned-in

node address on the adapter. The address must be administered

locally and is specified as three hexadecimal numbers, such as 0x4000

0x1234 0x5678.

recbufcount

Configures the number of receive buffers in the receive buffer pool.

The maximum size of the frames that may be received by the adapter

is determined by: min.(MaxFs, recbufsize * min.(8, recbufcount)),

where MaxFs is 4472 at 4 MBPS and 17954 at 16 MBPS. The

maximum amount of receive buffers, recbufsize * recbufcount, must

not exceed 64K.

recbufhigh

Configures the receive buffer pool in high (above 1 megabyte) or low

memory. The default value for this entry is 0, which causes the

receive buffer pool to be allocated for high memory. If the value for

this entry is 1, the receive buffer pool is allocated for low memory.

recbufsize

Configures the size, in bytes, of buffers in the receive buffer pool. The

maximum size of the frames that may be received by the adapter is

determined by the following: min.(MaxFs, recbufsize * min.(8,

recbufcount - 1)), where MaxFs is 4472 at 4 MBPS and 17954 at 16

MBPS. The maximum amount of receive buffers, recbufsize *

recbufcount, must not exceed 64K.

rpl

Postpones the adapter initialization and diagnostics from boot time to

bind time. The value of this entry, RPL, must appear in the

PROTOCOL.INI file to ensure that a Remoteboot function is not

disturbed at the time of adapter initialization.

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 418 419

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 252