Cabletron Systems T2015 Guía de instalación Pagina 242

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 419
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 241
232 Installation Guide for Clients
Proteon P134x, P1840
Required entry:
drivername = pro4$ or pro4n$
This driver is for the following network adapters:
Proteon P1340
Proteon P1342
Proteon P1346
Proteon P1347
Proteon P1840
The following table summarizes the possible entries and values in the
[pro4] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
dmachannel integer 5–7 5
drivername pro4$ or pro4n$
interrupt integer 2–12 3
iobase hex. 100-EEE0 A20
membase hex. A000–FE00 E000
nodeaddr hex. 12 hex. digits
Entries in the [pro4] section of the LAN Manager PROTOCOL.INI file
have the following meanings:
dmachannel
Indicates the DMA channel used by the adapter. This parameter only
applies to AT-style adapters; it is ignored for MicroChannel adapters.
drivername
Identifies the device driver name. The driver name consists of the base
portion of the filename, plus a digit if more than one adapter is
installed. The drivername is pro4$ for the first adapter, pro42$ for
the second, and so on.
interrupt
Indicates the interrupt level of the network adapter.
iobase
Indicates the base I/O address, in 16-byte increments, for the network
adapter. The value specified must match the AT-style jumper settings
or the MicroChannel POS register settings on the adapter.
Vista de pagina 241
1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 418 419

Comentarios a estos manuales

Sin comentarios