
Chapter 9 Network Device Driver Options 219
NCR Systems BV WaveLAN
Required entry:
• drivername = ncrwve$ or ncrwven$
This driver is for the following network adapters:
• NCR Systems BV WaveLAN/AT
• NCR Systems BV WaveLAN/MC
• PureData PDI90211
• PureData PDuC90211
The following table summarizes the possible entries and values in the
[wave_nif] section of the LAN Manager PROTOCOL.INI file:
Entry Units Range Default
acr decimal 2 or 6 6
drivername — — ncrwve$ or ncrwven$
iobase hex. 300H–3L0H 300H
Entries in the [wave_nif] section of the LAN Manager PROTOCOL.INI
file have the following meanings:
acr
The Accelerated Contention Resolution parameter. Setting the value
to 2 for workstations may adversely affect the performance of the
entire network.
drivername
Identifies the device driver name. The base portion of the filename,
plus a digit when more than one NCR WaveLAN adapter is installed,
is the drivername. The drivername is ncrwve$ for the first adapter,
ncrwve2$ for the second, and so on.
iobase
Indicates the base I/O address for the network adapter. This is used
only for the AT WaveLAN network adapters. The value specified
must match the jumper settings on the adapter.
Comentarios a estos manuales