Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 160)

100

101

150 Installation Guide for Clients

3Com EtherLink III Family

Required entry:

• drivername = elnk3$ or elnk3n$

This driver is for the following network adapters:

• 3Com EtherLink III Family

The following table summarizes the possible entries and values in the

[elnk3] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — elnk3$ or elnk3n$

ioaddress hex. 0x200–0x3E0 –

maxtransmits integer 2–50 6

netaddress hex 12 hex. digits see explanation

slot integer 0–15 –

Entries in the [elnk3] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

drivername

Identifies the driver name of the network device driver. The

drivername is elnk3$ for the first EtherLink II adapter, elnk32$ for

the second, and so on.

ioaddress

The adapter base address is used to specify a single adapter in a multi-

adapter configuration in an ISA computer. It is optional, and there is

no default value. The value of this entry must be between 0x200 and

0x3E0, in steps of 0x10.

maxtransmits

Specifies the number of transmit queue entries in this driver. This is an

optional entry. Use the default for MS-DOS and OS/2 clients. Set

MAXTRANSMITS=40 for OS/2 servers.

netaddress

Overrides the network address of the network adapter. The value of

this entry is a hexadecimal string of 12 digits enclosed in quotation

marks, such as "00608C123456". This is an optional entry; the default

is the network address EEPROM value

slot

Specifies the EISA slot number. This is an optional entry, and is only

used to specify a single adapter in a multi-adapter configuration in an

EISA computer.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 418 419

Comentarios a estos manuales

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 160

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cabletron Systems T2015