Cabletron Systems T2015 Guía de instalación Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 419
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Chapter 6 Managing an MS-DOS Workstation 63
5. When you finish adding or removing protocols, choose the OK
button. The selected protocols are bound to the network adapter
driver in this network device driver configuration. The Workstation
Configuration dialog box returns, showing the modified network
device driver configuration.
6. Optionally, from the Workstation Configuration dialog box you can:
Change the protocol(s) bound to a network adapter driver in
another network device driver configuration.
Add another network device driver configuration (as described
later in this section).
Remove a network device driver configuration (as described later
in this section).
7. When you have completed your review or changes, exit the
Workstation Configuration dialog box.
To exit this dialog box and discard any changes you made, choose
the Cancel button. The Setup screen returns. You are finished, and
steps 8 and 9 do not apply.
To save any changes you made, choose the OK button. Depending
on this computer’s configuration and whether you made changes,
the TCP/IP Settings dialog box (step 8), the Configuration
Complete dialog box
(step 9), or the Setup screen appears.
8. If the TCP/IP protocol is included in one of the configurations, and if
you chose the OK button in the Workstation Configuration dialog
box, the TCP/IP Settings dialog box appears:
Review or edit the TCP/IP Settings dialog box as necessary, and then
choose the OK button.
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 418 419

Comentarios a estos manuales

Sin comentarios