Cabletron Systems T2015 Guía de instalación descargar pdf (Pagina 33)

Chapter 2 Planning for Installation and Configuration 23

Some network adapter drivers are monolithic. A monolithic driver

acts as both a network adapter driver and a protocol, and it does not

require that another protocol be selected and bound to it. Only one

monolithic driver, the loopback driver, is provided with

LAN Manager. This driver lets a computer with no network adapter

run LAN Manager for testing purposes. (For more information about

the loopback driver, see Part 4, “Network Device Drivers.”)

Protocols

You must also choose one or more protocols to bind to each selected

network adapter driver. If the network adapter driver is monolithic,

however, you cannot choose a protocol to be bound to it.

A Basic workstation can have one network adapter with one protocol.

For more information about network adapter drivers and protocols, see

Part 4, “

Network Device Drivers.

” For information about network

adapter settings, see Part 4 and your network adapter manual(s).

TCP/IP Settings

When you select the TCP/IP protocol, you can specify four parameters.

IP address

The internet protocol address, a unique number that identifies the

computer to other computers on the network. The IP address has four

fields separated by periods, in the form:

w.x.y.z

The range for the first three fields (w, x, and y) is 0 through 255. The

range for the last field is 1 through 254. The IP address setting

requires an entry.

Subnet mask

A series of bits used to identify the subnet number portion of an IP

address. The Subnet mask has four fields separated by periods, in the

form:

w.x.y.z

The range for the first three fields (w, x, and y) is 0 through 255. The

range for the last field (z) is 1 through 254. The Subnet mask setting

is required.

Default gateway (router)

The IP address of the default router used. A router is a hardware

device that connects networks together to create an internetwork.

The Default gateway (router) has four fields separated by periods, in

the form:

w.x.y.z

The range for each of the four fields is 0 through 255. The Default

gateway (router) setting is optional.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 418 419

Comentarios a estos manuales

Sin comentarios

Cabletron Systems T2015 Guía de instalación Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cabletron Systems T2015