Cabletron Systems WPIM-DDS Guía de instalación descargar pdf (Pagina 54)

Chapter 4: Troubleshooting

4-8 HSIM-W6 Installation Guide

Status (STS) LED is OFF

WPIM-T1, WPIM-E1, WPIM-DI, or WPIM-DDS Installed in HSIM-W6

The port is operating normally. If it is not, and this LED is OFF the port may be disabled.

• Use QuickSET or Local Management to make sure that the WAN interface on the Local device

is conﬁgured correctly.

WPIM-SYNC Installed in HSIM-W6

The port is operating normally. If it is not, and this LED is OFF the port may be disabled or RTS

may be inactive.

• Use QuickSET or Local Management to make sure that the WAN interface on the Local device

is conﬁgured correctly.

WPIM-HDSL Installed in HSIM-W6

The port is disabled or has been placed into Loopback Test mode.

• Use QuickSET or Local Management to make sure that the WAN interface on the Local device

is conﬁgured correctly.

• Use QuickSET or Local Management to make sure that the WAN interface on the Remote

device is conﬁgured correctly.

WPIM-S/T Installed in HSIM-W6

The port is operating normally and ISDN BRI channels B1 and B2 are not active. If it is not, and

this LED is always OFF, the port may be disabled.

• Use QuickSET or Local Management to make sure that the WAN interface on the Local device

is conﬁgured correctly.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 91 92

Sin comentarios

Cabletron Systems WPIM-DDS Guía de instalación Pagina 54