Cabletron Systems WPIM-DDS Guía de instalación descargar pdf (Pagina 51)

Troubleshooting HSIM-W6 Hardware

HSIM-W6 Installation Guide 4-5

Troubleshooting HSIM-W6 Hardware

Power (PWR) LED is OFF

• Check that the power connection is ﬁrmly attached to the back panel of the HSIM-W6, and the

other end to an active power source.

Processor (CPU) LED is OFF

If the CPU stays OFF for an extended amount of time, and the power (PWR) light remains on, the

CPU is in an unknown state.

• Contact Cabletron Systems Global Call Center for technical support (refer to Getting Help in

Chapter 1).

Table 4-9 HSIM-W6 WAN Status (STS) LED States for HDSL Ports

LED Color State

Status (STS)

OFF Normal or disabled

RED One or both loops not synchronized

AMBER Not used

AMBER (blinking) Port in test mode

GREEN

Full (both loops synchronized)

Fractional (one lop synchronized)

Table 4-10 HSIM-W6 WAN Status (STS) LED States for S/T Ports

LED Color State

Status (STS)

OFF Normal or disabled

RED Not used

AMBER Not used

AMBER (blinking) Port in test mode

GREEN B1 or B2 active

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Sin comentarios

Cabletron Systems WPIM-DDS Guía de instalación Pagina 51