
Configuration Views Redundancy View
SPECTRUM Enterprise Manager Page56 Cabletron Ethernet Hubs
Additional Configuration View
You can access the Additional Configuration View
by clicking the Additional Configuration button in
the Configuration View. In addition to the model
name and network address, this view shows three
panels, each with eight slot designations. The
panels are labeled Ethernet MIMs, Token Ring
MIMs, and FDDI MIMs. When the button next to a
slot number is depressed, it means that a MIM of
that type is installed in the slot. This view is
available only for the IRM2 and IRM3 hubs.
Force On Boot When set to Server, the boot
software will attempt to boot
from the TFTP boot server. If
no boot is found and flash
memory is valid, the device
will boot from the flash
memory regardless of the
setting for this variable.
When set to Flash_Memory,
the device will boot from
flash memory.
TFTP Request
Host
A user-defined IP address of
the server to be used when
the firmware is to be loaded
over the network.
TFTP Request
FileName
A user-defined filename that
is requested of the server
when the firmware is to be
loaded over the network.
RAM To Flash When set to Commit, the
boot software will erase the
flash memory, compress the
download code, and save
the compressed image into
flash memory.
Table 16: DownLoad Software View Field
Definitions
Field Definition
Cold Boot When set to Initiate, the
boot software will initiate a
reboot of the system. All
MIB variables in this view
used to control the exact
nature of the download
should be set prior to the
setting of this variable.
Table 16: DownLoad Software View Field
Definitions
Field Definition
Comentarios a estos manuales