Cabletron Systems RoamAbout Guía de usuario descargar pdf (Pagina 24)

Managing Your Access Point with SNMP

1-12 Introducing RoamAbout Access Point

Managing Your Access Point with SNMP

You can manage your Access Point using any SNMP-compliant Network

Management Station (NMS). These NMS systems use the MIB objects to manage the

system. The Access Point supports the following MIB objects:

•

MIB II (RFC–1213)

•

IETF Bridge MIB (RFC–1493)

•

Ethernet MIB (RFC–1398)

•

DEC ELAN Vendor MIB

•

HUB PCOM MIB

•

RoamAbout Access Point MIB

•

802.11 MIB

For details on the management features of each MIB, consult your NMS

documentation.

To enable SNMP management for the AP, use the setup port utility or RoamAbout

Access Point Manager, and perform the following tasks (described in Description of

Access Point Installation Menu Options on page 4-12):

The remaining chapters in this guide explain how to install, configure, and problem

solve the Access Point.

Step Action

1 Set the in-band interface IP address of the AP.

2 Set the in-band interface default gateway address.

3 Optionally set the SNMP read/write community name (default is

“public”).

4 Optionally add SNMP trap addresses.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 89 90

Sin comentarios

Cabletron Systems RoamAbout Guía de usuario Pagina 24