Cabletron Systems RoamAbout Guía de instalación descargar pdf (Pagina 64)

Verifying the Operation of the Access Point

3-28 Installing the Access Point

Table 3-1: Access Point LED Summary Table

Name Description

Power/System

Lights when the Access Point has power and has passed the self-test.

If the Access Point fails the test, the LED blinks at a steady rate.

Bridge State Lights when the Access Point is forwarding packets.

Access Point

Saturated

Lights when the Access Point is saturated. Saturation occurs when the

Access Point cannot forward packets from the Ethernet to the wireless

side due to the lower throughput of the wireless network. The degree

of LED brightness indicates the level of saturation. The LED dims

(and eventually extinguishes) as the network congestion is processed.

Wireless LAN

Activity

Lights when packets are:

• Received on the wireless port and forwarded to the

Ethernet port.

• Received on the Ethernet port and forwarded to the

wireless port.

• Addressed to or generated by the Access Point using the

wireless port.

Packets received and filtered are not shown. The average brightness

of the LED indicates the level of activity on the wireless port. If the

LED blinks in unison with the Power/System OK and the Bridge

State LEDs, the wireless port has a fault that prevents the Access

Point from establishing a connection to the network.

Wired LAN

Activity

Lights when data is received on the Ethernet port. Data transmitted by

the Access Point is not shown. Data traffic forwarded to the Ethernet

port from the wireless port is not shown.

1 2 ... 59 60 61 62 63 64 65 66 67 68

Sin comentarios

Cabletron Systems RoamAbout Guía de instalación Pagina 64