Cabletron Systems RoamAbout Guía de instalación Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Surface Wallmount Installation
3-16 Installing the Access Point
10 Connect the 10BaseT
Ethernet network cable.
If you are using the remote
power feature, label the end
of the cable to the Access
Point with: CAUTION:
Ethernet cable contains
power. Do not use for other
devices.
If you are not using remote
power, install the power
module/redundant power
module, if used; refer to
Power Module Installation
on page 2-7.
11 Connect the power module into an AC outlet.
12 Verify power on by observing that some of the Access Point LEDs are
flashing or lit.
Step Action
Power
Connector
Ethernet
Cable
Connector
S2S1
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Comentarios a estos manuales

Sin comentarios