Cabletron Systems TPRMIM-22 Guía de usuario descargar pdf (Pagina 146)

Selecting Devices and Conﬁgurations

Loading a Conﬁguration

5-2

Enterprise Conﬁguration Manager

User’s Guide

Selecting Devices and Conﬁgurations

How to Select Devices of Different Types

In ECM, you can load conﬁgurations in one procedure to one or more devices

of the same type in the selected landscape(s). This means:

• To chose a different type of device from the one selected in SPECTRUM,

you must exit ECM, select a device of the type you want in SPECTRUM,

and return to ECM. For example:

1. In ECM, you might have loaded conﬁgurations to a set of Cisco

routers: say Cisco70, Cisco71, and Cisco72. The router type might be

called Rtr_CiscoIGS.

In this case, the only type of conﬁgurations that ECM will display in

the selected landscapes in either the device speciﬁc or shared

conﬁgurations windows are those for Cisco routers of type

Rtr_CiscoIGS.

2. To next load some conﬁgurations to one or more hubs in the same

landscapes, you must exit ECM, select one of those hubs in

SPECTRUM, and then re-enter ECM.

Further, if you are conﬁguring hubs of one type, say Cabletron EMME

hubs (labeled type Hub_CSIEMME), and then want to conﬁgure hubs

of another type, (either from Cabletron or elsewhere), you also have to

exit ECM and in SPECTRUM select a hub of the type you want to

conﬁgure.

• To chose a subcomponent type of the device selected in SPECTRUM, click

on the Navigate Components option from the Options menu in the ECM

Main window. For example, if you have selected a hub, from the Navigate

Components option, you can go to and conﬁgure the boards in the hub

without having to exit ECM.

Two Ways to Specify Conﬁgurations

Once you have created a conﬁguration either with or without a template, you

can load that conﬁguration from the ECM Main window in one of the following

two ways, depending on its type:

• As device speciﬁc (see Loading Device Speciﬁc Conﬁgurations, on

Page 5-15).

• As shared (see Loading Shared Conﬁgurations, starting on page 5-23).

If you have a device speciﬁc conﬁguration that you want to load to more than

one device, you must make it a shared conﬁguration before you can load it (see

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 290 291

Sin comentarios

Cabletron Systems TPRMIM-22 Guía de usuario Pagina 146