Cabletron Systems CSX400-DC Guía de usuario descargar pdf (Pagina 164)

General Configuration Using Local Management

150 CSX400 and CSX400-DC User’s Guide

Bridge_Port

— Use this command ﬁeld to select the CSX400 bridge port you want to

conﬁgure.

Selecting a Spanning Tree Protocol

To select the Spanning Tree protocol to be used by the CSX400, perform the following steps:

1. Use the arrow keys to highlight the SPANNING TREE PROTOCOL field.

2. Press the SPACE bar or BACKSPACE to select [IEEE 802.1], [DEC], or [NONE].

3. Use the arrow keys to highlight the SAVE command field.

4. Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.

Selecting the Bridge Port Administrative Status

To select the bridge port administrative status, perform the following steps:

1. Use the arrow keys to highlight the [BRIDGE_PORT XX] field at the bottom of the Bridge

Setup screen.

2. Press the SPACE bar or BACKSPACE to select the bridge port you want to configure. The

selected bridge port displays in the Bridge Port Admin Status field.

3. Use the arrow keys to highlight the BRIDGE PORT ADMIN STATUS: PORT X - - > ALL

PORTS [ENABLED] field.

4. Press the SPACE bar or BACKSPACE to select ENABLE or DISABLE.

For example, the following bridge setup indicates that bridge port 01 is configured to bridge

traffic to all ports:

BRIDGE PORT ADMIN STATUS: PORT 01 - - > ALL PORTS [ENABLED]

5. Use the arrow keys to highlight the SAVE command field.

6. Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 274 275

Sin comentarios

Cabletron Systems CSX400-DC Guía de usuario Pagina 164