Cabletron Systems WPIM-RT1 Especificaciones Pagina 102

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 101
Troubleshooting
Service Manual
7-1
Samsung Electronics
7
7
7. Troubleshooting
7.1 Paper Feed problems – Causes and Solutions
7.1.1 Wrong Print Position
• Description Printing begins when the paper is in the wrong position.
Check and Cause Solution
A defective feed sensor actuator can cause incorrect
timing.
Replace the defective actuator
7.1.2 JAM 0
• Description
1. Paper does not exit from the cassette.
2. Jam-0 occurs when the paper feeds into the printer.
PTL
P
I
C
K
/
R
PR
CR
DR
SR
TR FR
Empty Sensor
OPC
L S U
Fuser
Toner Cartridge
EXIT
Sensor
Feed
Sensor
MP Sensor
Check and Cause Solution
1. Check the Solenoid by using Tech
Mode.
2. Check cassette/MP knock-up plate
and springs.
3. Check paper separator pad
4. Check the pick up roller for
contamination and correct assembly.
5. If continuous clusters occur, check all
rollers between pickup and registration
sensor.
6 If the paper feeds into the printer and
Jam 0 occurs, perform Tech Mode to
check feed sensor.
1. Replace the solenoid.
2. Repair / replace as required
3 Clean with soft cloth dampened with
IPA (Isopropyl Alcohol) or water.
Replace if required.
4. Clean with soft cloth dampened with
IPA (Isopropyl Alcohol) or water.
Replace if required
5. Ensure all rollers are clean and free to
operate correctly.
6. Check the SMPS PBA, Main PBA and
all connections. Replace any faulty
parts or the
Vista de pagina 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 189 190

Comentarios a estos manuales

Sin comentarios